Topic Tag: BWNC1

Home /
Viewing 3 topics - 1 through 3 (of 3 total)
    • Topic
    • Voices
    • Replies
    • Last Post
    • Classic Stock Car (CSC) Classic Stock Car (CSC) v5.0 Eligible Models: Any hard body provided the model represents a hard top stock car which competed in the 1960's (plus or minus 3 years). All bodies must contain a clear plastic front windshield, rear window and all quarter windows (driver and passenger door windows may be removed) Motor: BWA BWNC1 Wheels: Maximum 14mm diameter Front and Rear Tires: Any DArt Club Series Tire [DArt D8 or D9 strongly recommended] Minimum overall weight of 100g.

      Started by: Arthur in: R32 Class Criterium

    • 0
    • 0
    • 1 year ago

      Arthur

    • Boulevard Cruisers I stumbled across a very detailed kit last year I thought was a loner. At the Group25 show last weekend, I discovered there is a series of these cars. Gunze Sangyo is the manufacturer of these stunning 1/32 kits. You rarely see this type of detail. The chrome is over the top and really sparkles. There 7-cars to choose from: A 1955 Chevy Nomad, 57 Chevy Belair, 57 Caddy Brougham, 59 Caddy Seville, 59 Impala Sport, 59 Fairlane 500, and a 63 Thunderbird. Many are around $25 on EBay.   The 59 Impala comes with 4-options for the roof. Open back seat, rear seat cover, soft top, or hard top. The 63 Thunderbird comes with 3-options for the roof. Open back seat, tonneau cover, or full roof. Art saw these kits at the show and it inspired him enough to suggest a new class of street racers without numbers. May I suggest it be called "Boulevard Cruisers"? White walls, low riders, slow motors... I also located a 59 Eldorado Biarritz. It's supposed to arrive next week. I really hope this turns into a new class in the future as Art suggested. These cars from Gunze Sangyo are stunningly beautiful! EBay search "gunze sangyo 1/32"

      Started by: Avatar photoKen in: R32 Class Criterium

    • 4
    • 41
    • 3 years ago

      Avatar photoKen

    • Lotus 30 – DArt Body & Scratch Sidewinder Low Power Motor Chassis What better time to get into a Lotus 30 build than now - just in time for the upcoming CANAM Thunder! After some contemplation and a little scavenging then more contemplation it was settled. For this build I would mate the new DArt Lotus 30 body kit with full interior and fantasy livery to a scratch built chassis. I planned to use the following major components: DArt Lotus 30 Body Kit; 'low power' BWNC1 in a sidewinder configuration; Slot.It spur gear with scavenged 15T nylon pinion from some electronic device I threw away many years ago; 2 pair of BWA small 13" (11.85mm diameter) wheels all with DArt DA0211 urethane tires & DArt small inserts (customized); oil lite Parma bushings in the back, 1/8" brass tubes for the front stubs; and scavenged 'push in' guide from a Fly or other RTR scrap chassis. The trouble with making a 'low power' sidewinder model is always the gearing - so when I found the 15T nylon pinion with the correct pitch I couldn't resist. This sidewinder chassis would also be a torsion version using 3/32 piano wire as the spine sleeved by a section of 1/8" brass tube. The defining feature up front for this chassis would be the independent pins allowing the front wheels to have noticeable negative camber. I've wanted to experiment with a front end like this for a long time... if it didn't work then it would be easy enough to replace the sleeves with a straight section of tube. Several extra bits from the body kit are set aside for parts storage - like the larger inserts, clear lenses, short stacks & valve covers - they'll come in handy on another project sometime down the road I'm sure. I plan to use everything else.

      Started by: Arthur in: Scratch Built Models

    • 5
    • 15
    • 5 years ago

      Arthur

  •  

Viewing 3 topics - 1 through 3 (of 3 total)